1 / 3
Liqui Moly Cera Tec Ceratec + Liqui Moly Pro-Line Engine Flush 3721+2427
Liqui Moly Ceratec 300ml
Micro ceramic solid lubricant suspension based on hexagonal boron nitride (BN) in selected base oils. The laminar graphite-similar structure reduces friction and wear and prevents direct metal-to-metal contact. The < 0.5 µm particle size guarantees optimum filter flow properties and protects against depositing of solid lubricant particles.
Properties
- reduces frictional losses
- suitable for diesel particulate filters
- miscible with all commercially available motor oils
- increases smooth operation
- highest thermal stability
- excellent high and low temperature behavior
- tested for turbochargers and catalytic converters
- stable under extreme pressures
- compatible with fine filters
- no deposits
- long engine service life
- chemically inert
- reduces fuel consumption
Areas of application
Added to the lubricating oil of engines, compressors, pumps and manual transmissions. Excellent for use in passenger car and commercial vehicle engines (gasoline and diesel). Miscible with all commercially available motor oils and motor vehicle gear oils.
Application
300 ml is sufficient for up to 5 liters of motor oil. Long-term effect up to 50,000km.
Suitable for toothed belts running in oil. Shake well before use!
Comment
Not suitable for use with wet clutches!
Liqui Moly Pro-Line engine flush 500ml
The highly effective detergent and dispersant additives in association with the carrier fluid have been tested in the laboratory and in practical field trials for their ability to dissolve sludge and lacquer formers. All types of oil-soluble and oil-insoluble residues are brought into suspension and removed during the following oil change. An engine, which has been cleaned of deposits and contamination and is then filled with fresh oil that is not contaminated with old impurities can develop its full performance characteristics.
Properties
- highly economical
- gentle cleaning
- suitable for diesel particulate filters
- tested for turbochargers and catalytic converters
- simple to use
- no pollution to the environment
- does not attack common sealing materials
- rapid cleaning
Areas of application
Cleaning and flushing out the oil systems of gasoline and diesel engines. Improves hydraulic function e.g. VVT, VANOS and other oil actuated switches and valves.
Application
One 500 ml can is sufficient for up to 5 litres of oil. Add Pro-Line Engine Flush to the engine oil at running temperature before changing the oil. After adding the product, allow the engine to idle for approx. 10 to 15 minutes depending on the degree of contamination. Then change the oil and the filter. ProLine Engine Flush is compatible with all commercially available engine oils.
Note: Not suitable for use on motorbikes with wet clutches.
Properties
- highly economical
- gentle cleaning
- suitable for diesel particulate filters
- tested for turbochargers and catalytic converters
- simple to use
- no pollution to the environment
- does not attack common sealing materials
- rapid cleaning
Areas of application
Cleaning and flushing out the oil systems of gasoline and diesel engines. Improves hydraulic function e.g. VVT, VANOS and other oil actuated switches and valves.
Application
One 500 ml can is sufficient for up to 5 litres of oil. Add Pro-Line Engine Flush to the engine oil at running temperature before changing the oil. After adding the product, allow the engine to idle for approx. 10 to 15 minutes depending on the degree of contamination. Then change the oil and the filter. ProLine Engine Flush is compatible with all commercially available engine oils.
Note: Not suitable for use on motorbikes with wet clutches.
Package includes
1x ceratec
1x engine lush
Liqui Moly Ceratec 300ml
Micro ceramic solid lubricant suspension based on hexagonal boron nitride (BN) in selected base oils. The laminar graphite-similar structure reduces friction and wear and prevents direct metal-to-metal contact. The < 0.5 µm particle size guarantees optimum filter flow properties and protects against depositing of solid lubricant particles.
Properties
- reduces frictional losses
- suitable for diesel particulate filters
- miscible with all commercially available motor oils
- increases smooth operation
- highest thermal stability
- excellent high and low temperature behavior
- tested for turbochargers and catalytic converters
- stable under extreme pressures
- compatible with fine filters
- no deposits
- long engine service life
- chemically inert
- reduces fuel consumption
Areas of application
Added to the lubricating oil of engines, compressors, pumps and manual transmissions. Excellent for use in passenger car and commercial vehicle engines (gasoline and diesel). Miscible with all commercially available motor oils and motor vehicle gear oils.
Application
300 ml is sufficient for up to 5 liters of motor oil. Long-term effect up to 50,000km.
Suitable for toothed belts running in oil. Shake well before use!
Comment
Not suitable for use with wet clutches!
Liqui Moly Pro-Line engine flush 500ml
The highly effective detergent and dispersant additives in association with the carrier fluid have been tested in the laboratory and in practical field trials for their ability to dissolve sludge and lacquer formers. All types of oil-soluble and oil-insoluble residues are brought into suspension and removed during the following oil change. An engine, which has been cleaned of deposits and contamination and is then filled with fresh oil that is not contaminated with old impurities can develop its full performance characteristics.
Properties
- highly economical
- gentle cleaning
- suitable for diesel particulate filters
- tested for turbochargers and catalytic converters
- simple to use
- no pollution to the environment
- does not attack common sealing materials
- rapid cleaning
Areas of application
Cleaning and flushing out the oil systems of gasoline and diesel engines. Improves hydraulic function e.g. VVT, VANOS and other oil actuated switches and valves.
Application
One 500 ml can is sufficient for up to 5 litres of oil. Add Pro-Line Engine Flush to the engine oil at running temperature before changing the oil. After adding the product, allow the engine to idle for approx. 10 to 15 minutes depending on the degree of contamination. Then change the oil and the filter. ProLine Engine Flush is compatible with all commercially available engine oils.
Note: Not suitable for use on motorbikes with wet clutches.
Properties
- highly economical
- gentle cleaning
- suitable for diesel particulate filters
- tested for turbochargers and catalytic converters
- simple to use
- no pollution to the environment
- does not attack common sealing materials
- rapid cleaning
Areas of application
Cleaning and flushing out the oil systems of gasoline and diesel engines. Improves hydraulic function e.g. VVT, VANOS and other oil actuated switches and valves.
Application
One 500 ml can is sufficient for up to 5 litres of oil. Add Pro-Line Engine Flush to the engine oil at running temperature before changing the oil. After adding the product, allow the engine to idle for approx. 10 to 15 minutes depending on the degree of contamination. Then change the oil and the filter. ProLine Engine Flush is compatible with all commercially available engine oils.
Note: Not suitable for use on motorbikes with wet clutches.
Package includes
1x ceratec
1x engine lush
$22.41
Original: $74.71
-70%Liqui Moly Cera Tec Ceratec + Liqui Moly Pro-Line Engine Flush 3721+2427—
$74.71
$22.41Description
Liqui Moly Ceratec 300ml
Micro ceramic solid lubricant suspension based on hexagonal boron nitride (BN) in selected base oils. The laminar graphite-similar structure reduces friction and wear and prevents direct metal-to-metal contact. The < 0.5 µm particle size guarantees optimum filter flow properties and protects against depositing of solid lubricant particles.
Properties
- reduces frictional losses
- suitable for diesel particulate filters
- miscible with all commercially available motor oils
- increases smooth operation
- highest thermal stability
- excellent high and low temperature behavior
- tested for turbochargers and catalytic converters
- stable under extreme pressures
- compatible with fine filters
- no deposits
- long engine service life
- chemically inert
- reduces fuel consumption
Areas of application
Added to the lubricating oil of engines, compressors, pumps and manual transmissions. Excellent for use in passenger car and commercial vehicle engines (gasoline and diesel). Miscible with all commercially available motor oils and motor vehicle gear oils.
Application
300 ml is sufficient for up to 5 liters of motor oil. Long-term effect up to 50,000km.
Suitable for toothed belts running in oil. Shake well before use!
Comment
Not suitable for use with wet clutches!
Liqui Moly Pro-Line engine flush 500ml
The highly effective detergent and dispersant additives in association with the carrier fluid have been tested in the laboratory and in practical field trials for their ability to dissolve sludge and lacquer formers. All types of oil-soluble and oil-insoluble residues are brought into suspension and removed during the following oil change. An engine, which has been cleaned of deposits and contamination and is then filled with fresh oil that is not contaminated with old impurities can develop its full performance characteristics.
Properties
- highly economical
- gentle cleaning
- suitable for diesel particulate filters
- tested for turbochargers and catalytic converters
- simple to use
- no pollution to the environment
- does not attack common sealing materials
- rapid cleaning
Areas of application
Cleaning and flushing out the oil systems of gasoline and diesel engines. Improves hydraulic function e.g. VVT, VANOS and other oil actuated switches and valves.
Application
One 500 ml can is sufficient for up to 5 litres of oil. Add Pro-Line Engine Flush to the engine oil at running temperature before changing the oil. After adding the product, allow the engine to idle for approx. 10 to 15 minutes depending on the degree of contamination. Then change the oil and the filter. ProLine Engine Flush is compatible with all commercially available engine oils.
Note: Not suitable for use on motorbikes with wet clutches.
Properties
- highly economical
- gentle cleaning
- suitable for diesel particulate filters
- tested for turbochargers and catalytic converters
- simple to use
- no pollution to the environment
- does not attack common sealing materials
- rapid cleaning
Areas of application
Cleaning and flushing out the oil systems of gasoline and diesel engines. Improves hydraulic function e.g. VVT, VANOS and other oil actuated switches and valves.
Application
One 500 ml can is sufficient for up to 5 litres of oil. Add Pro-Line Engine Flush to the engine oil at running temperature before changing the oil. After adding the product, allow the engine to idle for approx. 10 to 15 minutes depending on the degree of contamination. Then change the oil and the filter. ProLine Engine Flush is compatible with all commercially available engine oils.
Note: Not suitable for use on motorbikes with wet clutches.
Package includes
1x ceratec
1x engine lush
